Hands-Free-Drawing Board & Hands-Free Lite Support
INSTRUCTIONS / SUPPORT DOCUMENTATION
Right click the links below and select “save as” or “download linked file”
Programming at the proper recording level -12db
UPDATE: Most laptops and computers will no longer properly record audio levels when you plug your transmitter into the mic in jack (like the videos show below). We now recommend that you purchase a USB audio interface to properly allow you to control the gain of your program data when recording.
Here’s an affordable one we have used before: https://amzn.to/3xsDVOe
You can use this 1/8″ to 1/4″ cable to connect your transmitter to the audio interface: https://amzn.to/2TXgfE8
Data Inversion Switch for Program Playback
For some Apple / Mac Devices – the switch needs to be TOWARD the Audio Jack
For all other products – the switch needs to be AWAY from the Audio Jack
Troubleshooting Tips for Dead Servos & Batteries
The rechargeable battery pack in your hands-free lite or hands-free magic drawing board will eventually lose it’s ability to hold a charge and need to be replaced. Additionally, you may find that one of your servos no longer responds and is not moving. The below video shows how to take apart your remote board and identify the parts in question.
MDB MAGICTRAX ROUTINE DOWNLOADS (Free with purchase of HFMDB or CONTROLLER)
Note – if the track is erratic, switch the Mp3 Source Inversion Switch inside the Eraser / Controller